SPAC Coating Thickness Gauge
( F-NF Probes Separate)This Type of Coating Thickness Meter is small in size, light in weight, easy to carry. Although complex & advanced, it is convenient to use &operate. Its ruggedness will allow many years of use if proper operating techniques are followed.
Features
It meets standards of Both IS-2178 Suitable for Lab & Industrial use in harsh conditions.
The F probe is for measuring the thickness of non-magnetic coating layers (e.g. Paint, Plastic, Chrome, Porcelain Enamel,Copper, and Zinc). Often used to measure the thickness of Galvanizing layer, Phosphide Layer, Copper Tile, Aluminum Tile.
N Probe measures thickness of Non-Magnetic Coatings on Magnetic Metals. Used for Anodizing, Varnish, Paint, Enamel, Plastic Coating, Powder applied to Aluminum, Brass, and Non Magnetic Steel etc.
It uses the exclusive Micro-Computer LSI Circuit & Crystal Time Base to offer high accuracy Measurement
Wide Measuring Range & High Resolution.
Specifications
Display : 4 Digits, 10 mm LCD
Range : 0-2000 Microns
Resolution: 1 -2 Microns up-to (0-99.9 Microns)
2- 4 Micron over 100 Microns
Accuracy: +/- 1 to 3 % or 2.5 Microns
Power Supply: 4 x 1.5 AA (Pencil Cells)
Temp: 0-50 Deg. C
Humidity < 80%
Weight: 260g without Cells